Push Nuts And Retainers

Filter

DIXON -

True ID Flange Retainers

StyleModelPrice (ex. VAT)
AFRRE-T24€419.92
RFQ
BFRR-T16€137.98
RFQ
AFRRE-T20€455.78
RFQ
BFRR-T08€88.19
RFQ
BFRR-T12€119.95
RFQ
BFRR-T20€163.22
RFQ
BFRR-T32€384.81
RFQ
AFRRE-T12€267.81
RFQ
AFRRE-T16€361.45
RFQ
BFRR-T24€225.31
RFQ
APPROVED VENDOR -

Cap Nut Steel Plastic

StyleModelHeightStud SizePrice (ex. VAT)
A4CUJ10.44"1/4"€12.05
A4CUJ20.44"5/16"€12.65
A4CUJ40.44"7/16"€6.41
A4CUJ30.46"3/8"€12.73
A1382630000.645"1/2"€7.14
A1382640000.645"5/8"€7.38
TEXAS PNEUMATIC TOOLS -

Quick Change Retainers

Texas Pneumatic Tools quick-change retainers provide a solid chuck to securely grip bits into the barrel of an air-powered hammer while allowing tool-free bit changes. These units feature a spring-loaded collar that slides back to release the bits. They thread onto the hammer barrel for quick installation.

StyleModelPrice (ex. VAT)
A4188€126.60
RFQ
B1291-APT2€126.60
RFQ
C1291-SUL2€126.60
RFQ
D1291-ROT2€126.60
RFQ
E1291-MPT2€126.60
RFQ
F1291-JET2€126.60
RFQ
G1291-IRC2€126.60
RFQ
E1291-GD2€126.60
RFQ
A1291-FTC2€126.60
RFQ
B1291-CPT4€126.60
RFQ
H1291-CPT3€126.60
RFQ
I1291-CLE4€126.60
RFQ
J1291-CLE2€126.60
RFQ
B1291-ATS1€126.60
RFQ
K1291-1.970€126.60
RFQ
L9119€86.69
RFQ
M1291-1.942€126.60
RFQ
N1291-1.755€126.60
RFQ
O1291-1.692€126.60
RFQ
P1192-SUL2€90.30
RFQ
P1192-IRC4€90.30
RFQ
Q1192-IRC2€90.30
RFQ
P1192-FTC2€90.30
RFQ
P1192-CPT4€90.30
RFQ
R1192-CPT3€90.30
RFQ
VULCAN HART -

Retainers

StyleModelHeightLengthWidthPrice (ex. VAT)
A00-412691-000G1----
RFQ
A00-414369-00001----
RFQ
A00-493545----
RFQ
B00-958551-00002---€1.43
RFQ
C00-944144---€1.45
RFQ
A00-857976-00003---€189.39
RFQ
A00-492784----
RFQ
A750029----
RFQ
A750029-2----
RFQ
A753077-A----
RFQ
A00-881625---€45.99
RFQ
A706007----
RFQ
D00-353484-000010.55"2.45"4.9"€44.96
RFQ
E00-854564-000011.55"3.8mm3.9"€99.40
RFQ
APPROVED VENDOR -

Cap Nut Washer Steel 5/8 Inch, 25PK

ModelItemPrice (ex. VAT)
PW625019-598AD6ZMY€18.92
APPROVED VENDOR -

Cap Nut Washer Steel 1/4 Inch, 100PK

ModelItemPrice (ex. VAT)
228911004AD6ZMT€19.56
DISCO -

Nut, Thread Cutting, 18mm Width, 7mm Height, 50Pk

ModelItemPrice (ex. VAT)
1042PKAD3PBD€10.26
DISCO -

Nut, Plastic, 16mm Width, 10mm Height, 50Pk

ModelItemPrice (ex. VAT)
1228PKAD3PAT€8.96
APPROVED VENDOR -

Cap Nut Steel Plastic 3/16 Inch, 25PK

ModelItemPrice (ex. VAT)
4CUH9AD6ZPL€14.09
APPROVED VENDOR -

Cap Nut Washer Steel 3/8 Inch, 50PK

ModelItemPrice (ex. VAT)
228873004AD6ZMV€18.32
DISCO -

Nut, Thread Cutting, 20mm Width, 8mm Height, 100Pk

ModelItemPrice (ex. VAT)
1622PKAD3PBE€31.97
DISCO -

Nut, Thread Cutting, 15mm Width, 6mm Height, 50Pk

ModelItemPrice (ex. VAT)
1041PKAD3PBC€10.26
DISCO -

Nut, Nylon, 9mm Width, 8mm Height, 50Pk

ModelItemPrice (ex. VAT)
1577PKAD3PAF€10.93
GRAINGER -

Push On Cap Nut, Sae 1050-1065 Steel, External Type, 50PK

ModelItemPrice (ex. VAT)
230982004CG9WBT€10.26
PS DOORS -

Pushnut, 7/16 Inch Dia., 7/8 Inch Size, Powder Coated Yellow

ModelItemPrice (ex. VAT)
513576CE8UUP-
RFQ
VULCAN HART -

Pan Retainer Channel

ModelItemPrice (ex. VAT)
750052-AAU6EAB-
RFQ
VULCAN HART -

Tank Retainer Bracket

ModelItemPrice (ex. VAT)
701644AU3ZRF-
RFQ
VULCAN HART -

Rear Retainer Rod

ModelItemPrice (ex. VAT)
716922AU4VXG-
RFQ
VULCAN HART -

Retainer Rack Guide Shelf

ModelItemPrice (ex. VAT)
00-959653-00001AP6FFK-
RFQ
PS DOORS -

Chain Retainer

ModelItemPrice (ex. VAT)
513003CE8UYG-
RFQ

Push Nuts And Retainers

Push nuts and retainers protect against loosening or slipping and provide an aesthetic look to the protruding / exposed ends of threaded nuts, fasteners or bolts. These washers feature plastic / steel construction with 6 point contacts which align with the shaft circumference, ensuring maximum holding power and resistance against excessive vibration, increased torque, heat or corrosion. Texas Pneumatic Tools quick change retainers secure flat chisels and other attachments compatible with pneumatic hammers and are ideal for cutting metals, concrete or similar materials. These units can easily remove or exchange tools by pulling or releasing the sleeve. These products are available in black phosphate and zinc finish variants on Raptor Supplies.

Frequently Asked Questions

What are some points to remember while installing push nuts and retainers?

  • The threaded fastener should have appropriate diameter tolerance. Shafts having tight shaft diameter tolerance are supplied with the required holding force by the push nut.
  • The rod should have adequate hardness (without exceeding a fixed value) to allow the locking teeth to dig in.
  • The shaft cutoffs should be rounded or chamfered for quick installation of the push retainer.

What are the differences between push-on retainers and washers?

  • Washers are ideal for distributing the load from a fastener whereas push-on retainers are suitable for preventing fasteners from loosening or slipping in assemblies.
  • Generally, washers are shaped flat. Push-on retainers are not necessarily flat and may have teeth or grooves on one of their sides to resist the motion of a fastener.

We are here to help!

Looking for a part not listed here?