DAYTON Drum Pumps


Dayton drum pumps are used for transferring or dispensing automotive fluids, fuel and oils from drums or barrels. Dayton drum pumps allow more precise flow control than electric drum pumps and generate higher flow rates than hand drum pumps to dispense or transfer moderate to large amounts of f...luid.Read more

Filter
StyleModelBody MaterialGPMHeightMax. FlowMax. HeadMax. PressureMax. Temp.Outlet SizePrice (ex. VAT)
A
4AYD6
Aluminum, Steel4.765.5"4.76 GPM26 ft.150 Inlet / 750 Outlet140 F3/4" FNPT€609.31
B
5UWG6
Aluminum, Steel10.602.5"10 gpm34 ft.150 psi122 F3/4 In FNPT€501.72
C
5UWG8
Aluminum, Steel3.702.5"3.7 GPM34 ft.150 psi122 F3/4 In FNPT€480.92
D
5UWG1
Stainless Steel-18.5"10.6 gpm-142 psi140 F3/4" NPT€690.09

Drum Pumps

Dayton drum pumps are electric-powered, hand-operated or air-powered devices that are mainly designed to pump fluids from drums or containers. They decrease the risk of spills and also, decrease product waste by permitting fluid to be removed from barrels that are too heavy or large to be tipped for pouring. These pumps are provided with an intake hose or tube that easily fits through the opening of a container to dip into the fluid within. Choose from a range of these drum pumps, available in 3.7, 4.76 and 10.6 GPM flow rate options.

Working Mechanism

  • Mount the compressed air-operated pumps on a normally sealed metal drum.
  • Connect them through the large bung hole on the drum to a stand pipe.
  • Attach a hose to the standpipe and other attachments to handle the liquid.
  • A vacuum is created in two-way units by the drum pump which draws the liquid into the drum.
  • The air can be reversed via a knob on the drum pump to pressurise the drum and push the liquid out of it through the bottom of the standpipe.

Features

  • They are powered by a compressed air supply to draw out fluids from a container.
  • They are constructed with high corrosion-resistant materials that protect from acidic and basic chemical concentrations.
  • They are used to drain fuel tanks and remove spent fluids from vehicles and engine-powered machinery.
  • The brand offers both single-acting and double-acting pumps with outlet discharge ranging from 3.7 GPM to 10.6 GPM.
  • Dayton offers drum pumps in either stainless steel or a combination of aluminium and steel for durability.

Frequently Asked Questions

What material does Dayton use for making seals?

Seal rubbers of these drum pumps are either made of nitrile, a combination of nitrile, turcite and polyurethane or a combination of nitrile, nylon & polyurethane.

What is the maximum air pressure these pumps can handle?

Dayton drum pumps can withstand air pressures up to 150 psi.

Which motor is used to rotate these pumps?

Dayton drum pumps are equipped with a reciprocating air motor for smooth flow.

Which adapter is used in Dayton drum pumps?

Dayton drum pumps are installed with a sliding bung having 2 inches of drum thread for easy connections.

We are here to help!

Looking for a part not listed here?