DAYTON Effluent Pumps, 20 Inch Cord Length, 3450 RPM


Filter
StyleModelAmpsBase MaterialBearing TypeCord LengthDiameterDutyGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadPrice (ex. VAT)
A
3BB86
5.6Cast Iron-20ft.12.187"Intermittent8583€1,593.76
B
3BB85
8.3Cast Iron-20ft.12.187"Intermittent8583€1,585.26
C
4HDZ8
9.16Stainless SteelBall Bearing20"6.5"Continuous6859.5€406.49
C
2JGA2
11Stainless SteelBall20"6.5"Intermittent7063€443.35
C
2JGA3
11.7Stainless SteelBall20"6.5"Intermittent8577€708.44
B
3BB83
11.9Cast Iron-20"12.25"Intermittent7670€1,263.83

Effluent Pumps, 20 Inch Cord Length, 3450 RPM

Dayton effluent pumps are suitable for draining gray water containing small solids (up to 3/4 inch size) from a septic tank and out to a leach field. These submersible pumps feature semi-open non clog or vortex impellers for producing a large flow rate and nitrile rubber / silicon carbide shaft seals for preventing loss / escape of fluid from a rotating or reciprocating shaft, as well as providing lubrication for smooth movement. They operate intermittently / continuously (depending on application) and are equipped with a float switch for automatic pump functioning for draining out water when the septic tank is full. They also feature overload thermal protection for preventing the pump from overheating. Choose from a wide range of these submersible effluent pumps, available in 4/10, 1/3, 1/2 and 1 HP motor ratings.

We are here to help!

Looking for a part not listed here?