EATON Danfoss SPC1-10 Series Check Valves


Eaton Danfoss SPC1-10 Series check valves allow fluid to flow through them in only one direction. They are suitable for avoiding backflow in piping systems, water treatment plants and in various other industrial applications.

Filter
StyleModelPrice (ex. VAT)
A
02-161198
€304.29
A
02-161197
€339.43
A
566092
€428.97
A
02-161199
€289.26
A
565875
€265.15

Working Mechanism

  • When the fluid flows through the pilot-operated check valves in the forward direction, the poppet or ball in the check valve is pushed open.
  • This opening allows the fluid to flow through the valve.
  • If the flow direction reverses, the spring in the check valve pushes the poppet or ball closed, preventing backflow.

Features

  • Eaton Danfoss SPC1-10 Series check valves feature steel construction to withstand pressures up to 210 bar.
  • They comply with the ISO cleanliness code of 18/16/13 microns for preventing contaminants from entering the valves and handling flows up to 45 litres per minute.
  • Selected models have aluminium housing, making them suitable for use in a corrosive environment.
  • They have Buna-N seals to minimise leaks.

Compatible Accessories

Frequently Asked Questions

How to maintain a check valve?

To maintain a check valve, inspect it regularly for signs of wear or damage, clean it if necessary and replace any damaged parts as needed.

What is the difference between a check valve and a control valve?

Check valves allow flow in only one direction, while a control valve regulates the flow of fluid in both directions.

How to size a check valve?

To size a check valve, determine the flow rate and pressure of the fluid in your system. Then, select a valve that is rated for the maximum flow rate and pressure.

Can these valves handle extreme temperatures?

Eaton Danfoss SPC1-10 Series check valves can withstand temperatures within the range of -40 to 120 degrees C.

We are here to help!

Looking for a part not listed here?