[email protected] WhatsApp +44 203 287 5224

EATON E29 Series Pushbutton Lenses


Eaton E29 Series pushbutton lenses are used in stationary machinery & equipment outside the factory. These indicating glass lenses are used with indicator lights, LEDs or incandescent bulbs for emitting light to indicate the status of the equipment.

Filter
EATON E29KPBA
EATON E29KPRB
EATON E29KGRC
EATON E29KGCD
StyleModelPrice (ex. VAT)
A
E29KPB		€57.11
B
E29KPR		-
RFQ
C
E29KGR		€102.41
D
E29KGC		€102.41
RFQ
A
E29KP20		€57.11
C
E29KGG		€102.41
D
E29KP50		€57.11
RFQ
D
E29KG30		€102.41
RFQ
B
E29KPY		€57.11
B
E29KPW		€57.11
D
E29KG20		€102.41
RFQ
B
E29KPG		-
RFQ
A
E29KPA		€57.11
A
E29KP60		€57.11
A
E29KPC		€57.11
A
E29KP10		-
RFQ
C
E29KGW		€102.41
D
E29KGB		€102.41
RFQ
D
E29KGA		€102.41
RFQ

Working Mechanism

  • The electrical equipment is designed with a component that produces a signal, such as a switch or a sensor, to indicate its status.
  • The signal is then connected to a driver circuit which converts the signal into a form that can drive an indicator light.
  • The indicator light is mounted behind these indicating glass lenses, typically designed with a coloured filter that matches the colour of the light.
  • When the electrical equipment is in a particular state, the driver circuit sends a signal to the indicator light to turn on.
  • The light emits a beam of light that passes through the coloured filter of these indicating glass lenses, producing a visible indication of the equipment's status.
  • The user can then observe the colour and position of the light through the indicating glass lens to determine the state of the electrical equipment.

Features

  • They feature heavy-duty oil-tight construction for leakproof operations.
  • These pushbutton lenses have a glass bus for reduced distortion.
  • They come with a clear actuator for sharp, clear and magnified vision.

Frequently Asked Questions

How to clean Eaton E29 Series pushbutton lenses?

  • Turn off the power to the equipment to prevent any electrical hazards while cleaning the lens.
  • Use a soft & lint-free cloth or microfiber cloth to wipe the surface of the lens. Avoid using abrasive or harsh cleaning agents that can scratch or damage the lens.
  • Dampen the cloth with a small amount of water or a mild cleaning solution to help remove any dirt or debris on the lens.
  • Avoid spraying or pouring liquids directly onto the lens, as this can cause moisture to seep into the electrical components behind the lens.
  • Gently wipe the lens in a circular motion. Do not apply too much pressure or rub too vigorously to avoid scratching or damaging the lens.
  • Once the lens is clean, dry it thoroughly with a clean & dry cloth to prevent any moisture or streaks from forming on the surface.

How to install these lenses?

  • Identify the appropriate location for the lens and cut a hole in the panel to match its dimensions.
  • Mount the lens on the panel using appropriate hardware.
  • Connect the indicator light to the driver circuit using proper wiring connections.
  • Connect any additional wiring or components as needed.
  • Test the lens and light to verify proper operation.
  • Secure the panel or control box in place.
  • Follow equipment manufacturer's instructions and safety guidelines.

We are here to help!

Looking for a part not listed here?

Chat with us now

Popular Search Queries

Explore More