JUSTRITE Aerosolv Series Aerosol Can Disposals

How to install these aerosol can disposal systems?

• Get a liquid collection drum (30 to 55-gallon capacity) with two standard bungholes.
• Choose an acceptable receptacle and inspect it for signs of wear and tear.
• Check that the bung plugs for each hole are securely in place.
• Insert the Aerosolv unit via the 2-inch bunghole.
• Turn it clockwise until the ground support plate is securely engaged with the drum rim.
• Before using, insert the combination filter into the liquid collection drum's 3/4-inch bung.
• Connect the anti-static wire's g-clamp to any nearby confirmed ground source.

How to protect these units from environmental contamination?

• Use a drum cover to avoid dust ingress.
• Install them above a non-earthen floor, free of cracks.

How to dispose of processed aerosol cans?

Aerosol cans can be recycled with other steel scraps after processing.

How to ensure safety while using these Aerosolv systems?

• Ground these units properly using an anti-static wire.
• Always use drums having a capacity of 30 gallons or higher.
• Always engage the sliding top plate and sealing knob against the can being punctured.
• Once the venting operation is complete, insert a padlock to avoid unauthorised use.

How to maintain these Justrite aerosol can disposal systems?

• These systems must be inspected after puncturing about 1000 cans.
• Clean the drum thoroughly.
• Apply three wraps of Teflon tape to the threads that attach to the collection drum.

What are the factors to consider while choosing these Justrite aerosol can disposal systems?

Major factors include aerosol can types, regulatory compliance, disposal volume, emissions control and ease of use.