[email protected] WhatsApp +44 203 287 5224

WATTS Vacuum Breaker


Watts vacuum breakers are backflow preventers that attach to portable hoses, hose thread faucets or water supply fixtures and prevent the back siphonage / reverse flow of polluted or non-potable water into the potable water systems. These Watts 8 Series vacuum breakers protect users from health... hazards due to contaminated water in service sinks, swimming pools, urinals & wash racks.Read more

Filter
WATTS 8BIA
WATTS 8BB
WATTS 8BCC
StyleModelMaterialPrice (ex. VAT)
A
8BI		Brass€16.38
B
8B		Brass€28.20
C
8BC		Chrome-Plated Brass€53.05

Working Mechanism

  • Thread a Watts vacuum breaker onto the hose bibb & hose. Then tighten the attached set screw till its head breaks off.
  • These vacuum breakers allow passage of water in normal conditions and prevent the entry of air. However, when the water pressure at the unit's location decreases below a certain level, the volume breaker starts intaking air to break the suction effect caused by vacuum ( low pressure), thereby preventing backflow or back siphoning.
  • They can be drained off in winters after use by removing the hose and lightly pulling down the knurled tip on the stem.

Features

  • Watts vacuum breakers feature brass construction with stainless steel working parts and have rubber diaphragm & disc for corrosion resistance and durability.
  • They can be screwed directly onto a sill cock and require no plumbing changes.
  • These Watts 8 Series vacuum breakers can operate at a maximum pressure of 125 psi and a maximum temperature of 180 degrees F.
  • They have GHT type connections on both male & female ends with 3/4 inch inlet & outlet size.
  • These vacuum breakers have a break-away set screw for tamper resistance.
  • Selected models of these Watts vacuum breakers are made of chrome plated brass for protection against scratches and easy cleaning.

Compatible Accessories

  • Watts Vacuum Breaker Kits: They include replacement components like check assembly, springs & O-rings for repairing faulty, old or worn out parts of these 8 Series Watts vacuum breakers.

Standards and Approvals

  • ANSI A112.1.3
  • ASSE Standard 1011
  • CSA B64.2
  • IAPMO (International Association of Plumbing and Mechanical Officials) listed

Frequently Asked Questions

How can users perform maintenance operations on these Watts vacuum breakers?

  • The breaker should be periodically checked for leaks & breakages. Replace the seals & other components if possible.
  • The residual water should be drained away in winters to prevent blowout and the valves should be opened halfway to allow air to escape.

    • Does a vacuum breaker prevent freezing?

    Yes, a properly drained out vacuum breaker can prevent freezing of the fixtures in winters to protect them from cracks.

    What is the difference between a backflow preventer and a vacuum breaker?

    Backflow preventers prevent the reverse flow of fluids irrespective of the type of fluids and their location. A vacuum breaker is a specialised backflow preventer that stops non potable water from back siphoning into the potable water supply.

    What is Back siphonage?

    Back siphonage or backflow in a system occurs when a negative pressure (vacuum or partial vacuum) zone is created in the supply piping. It results in siphoning effect from the contaminated water sources into the drinkable water supply lines.

    We are here to help!

    Looking for a part not listed here?

    Chat with us now