ALTRONIX NetWay1D Midspan Power Injector, Single Port, 115 / 230VAC Input

Midspan power injectorssupply power and pass on data (text, audio and video) when connected directly with Power-over-Ethernet (PoE) devices or with non PoE devices through a separate adapter. Altronix NetWay1D indoor single port midspan injector uses Power-over-Ethernet (PoE) technology for enabling network cables to carry both electrical power & data simultaneously. The PoE compliant devices can be at a maximum distance of 100 m from the midspan NetWay1D injector. The NetWay1D power injector gets its power supply through an IEC 320 connector (located at the backside of the device), having a voltage rating of 115VAC (at 1.2A) and 230VAC (at 0.75A). This device delivers PoE (15W), PoE+ (30W) and Hi-PoE (60W) power outputs using all 4 pairs of ethernet cable (CAT5e) at a data transmission speed of 10 / 100 / 1000 Mbps. It is also equipped with an auxiliary power connector having 56VDC / 60W output rating for safely transmitting data and power over a coax cable of length up to 500 m. This auxiliary Class 2 rated power limited output is used by Altronix eBridge Plus receivers to provide a cost effective way for replacing legacy analog devices with new IP devices / cameras over existing coax cables. NetWay1D power injector reduces extra wiring as it transmits data & power over ethernet / data cable that is already in place instead of installing additional power sockets for each of the devices. It has a lightweight & compact body for installation in indoor locations with limited space. This injector comes with numerous safety features like surge protection, auto-detection & protection facility of legacy non-PoE cameras / devices and LED indicators for port status, PoE status & IP link status.Raptor Supplies also offers Netway1XPmidspan power injector having shutdown triggers for manually shutting down power transmission to the PoE devices.

Uses:

Altronix NetWay1D can be connected to PoE cameras, fixed IP cameras, VoIP phones, wireless access points & networked audio devices to provide PoE, PoE+ and Hi-PoE in offices, commercial buildings & industrial spaces.

Features:

• Altronix NetWay1D injector is powered using a grounded AC line cord to deliver 115VAC (60Hz, 1.2A) or 230VAC (50 / 60Hz, 0.75A) input power.
• It has two RJ45 PoE ports to connect 4 pair CAT5e or higher efficiency cables, one from video server and another towards IP cameras.
• The [Out] port of the device transfers data to PoE devices at a data transmission speed of 10 / 100 / 1000 Mbps.
• This IEEE 802.3af, IEEE 802.3at & Hi-PoE compliant port provides a power rating of 15, 30 & 60W, respectively.
• It can transfer data and power up to a distance of 100 m.
• This devices also offers an Aux. Class 2 power limited output rated at 56VDC / 60W for replacing legacy analog devices with new IP devices / cameras over existing coax cables.
• It is equipped with various safety features like surge protection, auto negotiation and auto detection & protection facility of legacy non-PoE cameras / devices.
• This midspan injector is equipped with LED indicators, such as red for port & PoE status and yellow & green for IP link status.
• It operates at temperatures ranging from -30 to 50 degrees C (at 30W power) and -30 to 40 degrees C (at 60W power).

Compatible Accessories:

• Altronix eBridge Plus receivers can be used to pass Aux. Class 2 power limited output from Altronix NetWay1D power injector over coax cable to an enabled IP camera / device .

Standards and Approvals:

• Altronix NetWay1D midspan power injector is UL & cUL listed (for Information Technology Equipment; UL 60950-1) & CE marked (European Conformity) for ensuring enhanced performance and user safety.

Installation:

• Altronix NetWay1D injector is securely mounted on table or desktop in indoor locations.
• Then, a grounded AC line cord (included) is plugged into the IEC 320 connector of the NetWay1D unit using a reliable earth grounded socket. A receptacle controlled by a switch should not be connected to the power supply of the unit.
• Two structured cables can be used to connect the [IN] port to a UL-listed ethernet switch or a video server and the [OUT] port to the PoE device.
• Port status & PoE On LED indicators will illuminate once the PoE device is turned on.
• The devices requiring auxiliary power are linked to the marked terminals [+AUX–].

Frequently Asked Questions:

Q. Can we connect any PoE device to the Netway1D power injector?

A. Altronix Netway1D is compatible with PoE devices requiring power supply ratings of 15, 30 & 60W.

Q. What kind of input power supply is required in Netway1D?

A. It is recommended to use a grounded AC line cord to deliver universal power input at 115VAC (1.2A) or 230VAC(0.75A).Q. What is a midspan power injector?

A. Midspan power injectors are PoE devices that connect a data server with a PoE-capable device (such as an IP camera). These injectors add (or inject) power to an ethernet or data cable for powering PoE devices without connecting each device to a separate power supply.

Q. How far can power injectors work?

A. Netway1D PoE injector can transfer both power and data to powered devices at a maximum distance of 100 m.

Q. What are the advantages of midspan power injectors?

A. PoE injectors or midspan power injectors deliver power & data to PoE devices with greater reliability, faster transmission speed and better security compared to WiFi enabled cameras. These PoE injectors also reduce the wirings associated with directly powered devices.