Change country- sign in
- Submit RFQ
Get it by Friday, Jan 31
Payment Options Available
| Item | Turbine pump |
| Amps | 7.5/3.8 |
| Bearing Type | Ball |
| Best Efficiency Flow Rate @ Head | 1 Gpm @ 85 Ft. |
| Best Efficiency Gpm @ Head | 1.0 @ 85 Ft. |
| Best Efficiency Head | 85 ft. |
| Best Efficiency Range Flow Rate @ Head | 55 To 110 Gpm @ 1.7 To 0.6 To Ft. |
| Best Efficiency Range Gpm @ Head | 55 - 110 @ 1.7 - 0.6 Ft. |
| Bracket Finish | Nickel Plated |
| Construction | Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve. |
| Cover Material | Cast Iron |
| Drain Plug | easily accessible at bottom |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Finish | Zinc Plated |
| Flow Rate @ 10 Psi | 2.5 GPM |
| Flow Rate @ 100 Psi | 0.7 GPM |
| Flow Rate @ 120 Psi | 0.4 GPM |
| Flow Rate @ 140 Psi | 0 GPM |
| Flow Rate @ 20 Psi | 2.6 GPM |
| Flow Rate @ 30 Psi | 2.3 GPM |
| Flow Rate @ 40 Psi | 2 GPM |
| Flow Rate @ 50 Psi | 1.5 GPM |
| Flow Rate @ 60 Psi | 1.6 GPM |
| Flow Rate @ 75 Psi | 1.3 GPM |
| Flow Rate @ 80 Psi | 1.1 GPM |
| Frame | 56J |
| Frame Size | 56J |
| Frequency | 60 Hz |
| Gasket Material | Buna N |
| Gpm | 0.9 |
| Gpm @ 10 Psi | 2.9 |
| Gpm @ 100 Psi | 0.7 |
| Gpm @ 20 Psi | 2.6 |
| Gpm @ 30 Psi | 2.3 |
| Gpm @ 40 Psi | 2 |
| Gpm @ 50 Psi | 1.8 |
| Gpm @ 60 Psi | 1.6 |
| Gpm @ 75 Psi | 1.3 |
| Gpm @ 80 Psi | 1.1 |
| Grade | Grade 304, Grade 316 |
| Height | 6 3/8" |
| Housing Material | Cast Iron |
| Hp | 1/3 hp |
| Hz | 60 |
| Impeller Material | Bronze |
| Impeller Type | Open |
| Inlet | 3/4" |
| Inlet Pressure | 150 psi |
| Inlet Size | 3/4" |
| Inlet Type | Npt |
| Length | 13 1/5" |
| Max. Case Pressure | 200 psi |
| Max. Flow Rate | 2.5 GPM |
| Max. Fluid Viscosity | 100 SSU |
| Max. Liquid Temp. | -20°F to +230°F |
| Max. Pressure | 140 psi |
| Max. Specific Gravity | 1 |
| Media Type | Water |
| Min. Flow Rate | 0.4 GPM |
| Min. Media Temp. | -20°F |
| Motor Enclosure | Open Drip Proof |
| Motor Rpm | 3450 |
| Motor Type | Capacitor-Start, Induction Run |
| Nema/iec Frame | 56J |
| Outlet | 3/4" |
| Outlet Size | 3/4" |
| Outlet Type | Npt |
| Phase | 1 |
| Priming | Self Priming |
| Rpm | 3450 RPM |
| Screw Material | Zinc Plated |
| Seal Application | Long Life When Not Run Dry Or Pumping Abrasives |
| Seal Material | Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring |
| Seal Type | Mechanical |
| Seat Material | Carbon Ceramic |
| Service Factor | 1.75 |
| Shaft Material | Stainless Steel |
| Shaft Size | 5/8" |
| Shut Off Pressure | 140 psi |
| Type | Centrifugal |
| Voltage | 115/230 |
| Volute Material | Cast Iron |
| Wetted Materials | Bronze, Cast Iron,Buna-N, Carbon, Ceramic and 316 Stainless Steel |
| Width | 6 1/2" |
| Ship weight (kg) | 16.083 |
| Ship height (cm) | 34.8 |
| Ship length (cm) | 55.88 |
| Ship width (cm) | 28.45 |
| HS code | 8413702005 |
| Country of Origin | IN |
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
