GUARDIAN EQUIPMENT G1814 Eyewash, Wall Mounted, Stainless Steel Bowl

Compatible Accessories:

• Guardian Ball Valve With Flag Handle: This valve assembly replaces the leaking valve to avoid wastage.
• Guardian AP470-001 Spray Head: This unit replaces the already installed spray heads to provide maximum water flow.
• Guardian Dust Cover: This cover replaces the worn-out dust cover to avoid contamination.

Standards and Approvals:

• ANSI Z358.1
• UPC

Frequently Asked Questions:

Q. How to flush this Guardian eyewash station?

A. Run the eyewash station for three minutes to remove any standing water from the line.

Q. Where should eye wash stations be placed?

A. Eyewash safety stations must be installed within 10 seconds or 55 feet from the possible hazard.

Q. How to inspect Guardian eyewash?

A.

• Check for running water: The valve should activate within a second and should not close on its own.
• Check for flow: The water stream should be about six inches long, crossing at the eyewash nozzle's centre.
• Check for balance: The water flow from the left and right eyewash nozzles should be equal.
• Check for temperature: The water temperature should remain between 60 to 100 degrees F.