MORSE DRUM 309-E3-50 Universal Drum Tumbler, 12 RPM, 3 Phase, Explosion Proof

Morsecorner-over-corner drum tumblers are used for mixing homogenised liquid and granulated or powdered products. These drum tumblers are designed to mix the contents of a 30 to 55 gallon (114 to 210 liter) fibre, plastic or steel drum. These drum tumblers have heights ranging from 29 to 37 inches (74 to 94 cm tall) and diameters ranging from 18 to 23.5 inches.
Morse 309-E3-50 universal drum tumbler provides rigorous corner-over-corner mixing of ingredients like granules, coarse pellets, powders, thick liquids or wet grains. This drum tumbler is ideal for tumbling a steel, plastic or fibre drum at 14 RPM speed. This Morse 309-E3-50 universal drum tumbler is powered by an explosion-proof 1 HP, single phase electric motor operating at 230 / 400V, 50 Hz; rated for Class I Group D and Class II Group F and G for user safety. It is capable of tilting the mixed ingredients weighing up to 400 lb & 800 lb for half drum & full drum, respectively. This Morse drum tumbler comes equipped with a web strap, two top clamps & a ratchet around the drum for securing the drum in the holder and can be used only in countries having a 50 Hz power supply.

Uses:

Morse 309-E3-50 universal drum tumbler is used in food & chemical, cosmetic and pharmaceutical industries to rotate steel, plastic or fibre drums corner-over-corner for vigorous mixing of drum contents like granules, powders, thick liquids, coarse pellets or wet grains.

Features:

• Morse 309-E3-50 universal drum tumbler features vigorous corner-over-corner mixing of ingredients like powders, thick liquids, granules, coarse pellets or wet grains.
• This drum tumbler provides homogenised stratified layers and prevents sedimentation in the bottom of the drum.
• Morse 309-E3-50 universal drum tumbler is designed for tumbling a steel, plastic or fibre drum at 12 RPM speed.
• This drum tumbler ensures user safety by reducing hazards of worker exposure and minimising the risk of contamination.
• Morse 309-E3-50 universal drum tumbler is powered by an explosion-proof 1 HP, single-phase electric motor operating at 230 / 400V, 50 Hz, and is rated for Class I Group D, and Class II Groups F and G for safety.
• This drum tumbler requires a crane and a Morse below-hook drum lifter to load an upright drum and comes equipped with a web strap, two top clamps and a ratchet around the drum for securing the drum in the holder.
• Morse 309-E3-50 universal drum tumbler is capable of tilting the mixed ingredients weighing up to 800 lb and 400 lb for the full drum and half drum, respectively.
• This drum tumbler can be used only in countries with a 50Hz power supply.

Compatible Accessories:

Standards and Approvals:

• Morse 309-E3-50 universal drum tumbler should be installed in accordance with OSHA subpart O.1910.212 standards to deliver high quality services.

Installation:

Morse 309-E3-50 universal drum tumbler has four holes in its base, spaced 68.6 cm wide x 114.3 cm long to allow easy installation with the help of 5/8 inch x 3 inch lag bolts. The installation should be as per local requirements for enclosure & safety interlock, and motor controls & power connections must adhere to applicable local codes.

Frequently Asked Questions:

Q. How to power a Morse 309-E3-50 universal drum tumbler?

A. Morse 309-E3-50 universal drum tumbler is powered by an explosion-proof 1 HP, single phase electric motor operating at 230 / 400V, 50 Hz, and is rated for Class I Group D, and Class II Groups F and G for added safety.

Q. What are the accessories available for Morse 309-E3-50 universal drum tumblers?

A. Following are the accessories that are compatible with Morse 309-E3-50 universal drum tumblers:

• Morse CP-309-E3-400-50: These explosion-proof control boxes are used with the Morse 309-E3-50 universal drum tumbler to prevent the damage caused by ignition or explosion.
• Morse 92 Series below-hook barrel lifters: These drum lifters are designed to lift & transport plastic, cardboard, fibre and rimmed-steel drums. They feature self-adjusting tong-like action for an automatic gripping while placing 30-gallon drums into 55's or 55's into 85's. They have slim-profile grippers for lowering a drum into a salvage or an overpack drum.

Q. What safety precautions do we take while drum handling?

A. Heavy drums must be moved with the proper drum equipment, specifically designed for their handling to prevent serious injury, drum damage and wastage of valuable contents or contamination of the environment. All users who handle drums must be trained to use drum equipment.

Q. What does the "half-full" capacity rating mean?

A. The half-full rating of a drum tumbler signifies the capacity for tilting an unbalanced, bottom-heavy drum. For example, the capacity of a Morse Hydra-Lift Drum Karrier is 800 lb. (363 kg) for a full drum but reduced to 500 lb. (227 kg) for a half-full drum.

Q. What other variants of Morse Drum Tumbler are available on Raptor Supplies?

A. Raptor Supplies offers 311 Series Tilt-to-Load drum Tumblers to accommodate a fiber, steel or plastic drum with heights ranging from 29 to 37 inches (74 to 94 cm tall) and diameters between 18 & 23.5 inches.