DAYTON Farm Duty Motors

Dayton aeration fan motors are used in high torque installations such as silo unloaders, conveyors, compressors, barn cleaners and manure pumps, enabling them to start under heavy load conditions. They feature rolled steel frame construction to resist corrosion and have totally enclosed air over enclosures to protect against dampness & airborne particles. These UL recognised motors have a permanent split capacitor design for high efficiency and a rigid base for balanced load distribution. They include capacitor covers, gasketed conduit boxes and rubber boots over the manual protector reset buttons to seal the motor against contaminants & weather. These CSA certified motors have shaft slingers to seal & protect shaft bearings by blocking dust & other particles, while retaining lubricants. The integrated ball bearings increase motor performance and operate on a continuous duty cycle to deliver constant power to machinery & tools, without experiencing downtime. They mount horizontally or at all angle positioning and offer cradle / stud / yoke mounting types. Choose from a broad range of these motors, available in torque speeds of 1/2, 1/3 and 1/4 hp.

Dayton hatcher / setter farm duty AC motors circulate moist / warm air inside poultry raising equipment. They feature rolled steel frames for resisting corrosion and totally enclosed air over enclosures to protect against dampness & airborne particles. These CSA certified & UL listed permanent split capacitor motors enable quiet, smooth & soft starting performance in blowers & fans. They operate on a continuous duty cycle to deliver constant power to machinery & tools, without experiencing downtime. They include gasketed terminal access covers & slingers to protect shaft bearings. The ball bearings increase motor performance and have stud or band mounting for easy installation. Choose from a wide range of these motors, available in auto and manual thermal protection variants.

Dayton aeration fan motors are ideal for use in high-torque applications under continuous duty cycle like barn cleaners, conveyors, manure pumps, silo unloaders and compressors. These motors have rolled steel frame for strength and durability. They feature high-torque design with a keyed motor shaft that rotates clockwise or counter-clockwise to allow the motor to start under heavy load conditions. They have totally enclosed air-over motor enclosure design for blowing air over the motor rather than allowing outside air to freely circulate through the interior of the motor, thereby cooling the motor and keeping them free of contamination. These motors have a rigid or cradle base for mounting them horizontally or vertically. They offer automatic thermal protection to start or stop the fan operation according to permissible ambient temperatures for protecting the fan motors. Choose from a wide range of these motors, available in power outputs of 1/3, 1/2, 3/4 and 1 hp.

Dayton split phase auger drive motors are used with augers, conveyors, manure pumps and poultry equipment. These motors feature rolled steel frames ensuring corrosion resistance, and totally enclosed non ventilated enclosures to prevent the ingress of dust & water. They come integrated with ball bearings for reduced rotational friction while delivering speeds up to 1725 rpm, and are capable of withstanding ambient temperatures up to 40 degrees C.

Dayton capacitor-start general purpose farm duty motors are used to power silo unloaders, barn cleaners, conveyors, compressors and manure pumps. They feature a totally enclosed fan-cooled enclosure to prevent motor heating and are integrated with ball bearings for less rotational friction while running at a maximum speed of 1740 rpm. These motors have green baked enamel finish for corrosion resistance, and are available in shaft diameters of 5/8 & 7/8 inches.

Dayton capacitor start auger drive motors are used for powering grain augers found in poultry raising operations. These motors feature frames made of rolled steel for structural rigidity and resisting corrosion on exposed surfaces. They have totally enclosed fan-cooled enclosures to prevent overheating of the motor, and are equipped with ball bearings for low rotational friction while running at a maximum speed of 1725 rpm. These motors allow flange / base mounting for easy installation, and are available in 1/2, 3/4 & 1 hp variants.

Dayton farm duty motors are used for generating high starting torque in various applications including aeration fans, conveyors, silo unloaders, barn cleaners, compressors and manure pumps. These units have steel construction with green coated finish for strength & durability. They come equipped with ball bearings for smooth & continuous operation and have totally enclosed air over (TEAO) enclosures for withstanding dusty and rough environments, as well as keeping away moisture. They further include shaft slinger and gasketed conduit boxes to protect motor components against weather conditions and ingress of contaminants. Choose from an array of these agricultural fan motors, available in lengths (less shaft) of 10 and 10.375 inches.

Dayton agricultural fan motors or poultry fan motors feature high starting torque to start under heavy loads. They provide reliable performance in rough & dirty environments, and are ideal for poultry equipment, crop drying, manure pumps, conveyors & augurs. These CSA certified motors feature rolled steel frame construction to resist corrosion and have totally enclosed, air-over enclosures to protect against dampness & airborne particles. They are equipped with ball bearings to increase motor performance, thereby preventing lubricant leaks. These UL listed motors have a rigid base and permanent split capacitor design for load distribution & high efficiency, respectively. They include extended thru bolts, shaft adapters, gasketed capticator covers & shaft slingers, and operate on continuous duty cycle to deliver constant power to the machinery & tools, without experiencing downtime. Choose from a wide range of these motors, available in stud, base and face mounting styles.

Dayton poultry fan motors are designed for adjusting and maintaining airflow in poultry and livestock barns. These motors feature capacitor start / run design for drawing less current and ball bearings to reduce friction and allow smooth movement of components within the system. They further include a gasket terminal access cover which acts as an enclosure to protect against rain or windblown dust and a shaft key that connects rotating machine components to the shaft and enables proper torque transmission. Choose from a wide range of these fan motors, available in green epoxy and baked enamel finish variants.

Dayton farm duty motors are ideal for producing high starting torque in various applications including aeration fans, conveyors, silo unloaders, barn cleaners, compressors and manure pumps. These units have steel construction with green coated finish for strength & durability. These units come equipped with ball bearings for smooth & continuous operation and have totally enclosed fan cooled (TEFC) enclosures for withstanding dusty and rough environments, as well as keeping away moisture. They further include shaft slingers and gasketed conduit boxes, protecting motor components against harsh weather conditions and ingress of contaminants. Choose from an array of these agricultural motors, available in motor power outputs ranging from 1/3 to 10 hp.

Dayton general-purpose farm-duty motors are ideal for use in high-torque applications like air compressors, augers, pumps, conveyors and other farm equipment. These 3-phase motors have greater efficiency than single-phase motors of similar specifications and do not need running / starting capacitors or centrifugal starting switches that fail or wear out. They have rolled steel frame for strength and durability and keyed motor shafts to rotate clockwise or counter-clockwise for continuous duty cycles. These motors feature totally enclosed fan-cooled enclosure design for cooling the motor and protecting them from moisture. They have a rigid base for all angle / horizontal mounting. Choose from a wide range of these motors, available in power outputs ranging from 1/3 to 10 hp.