Electromagnetic Lock Power Supplies

Altronix 24 hour 365 day event timers are designed for security, access control, home & building automation, and lighting control applications. These timers are integrated with independently controlled form C relay contacts to provide latching & momentary operations during a programmed schedule. They feature an EE Prom memory that prevents loss of programming in case of power failure. They have block programming capacity of accommodating a total of 350 events per week. These timers are made of steel / phenolic / fibreglass for high mechanical strength & corrosion resistance, and can be operated at temperatures ranging from -20 to 49 degrees C.

Altronic video balun / combiners are UL listed accessories used to transmit video, data & power to 24VAC fixed or PTZ indoor / outdoor cameras. These units are compatible with HubWay and HubSat UTP transceiver hubs, for use with 24VAC cameras. These units feature a green power LED indicator to inform about the unit's running status. They are made of plastic and can handle temperatures ranging from 32 to 120 degrees Fahrenheit.

Altronix AL300ULX Series power supplies are used for converting a 115VAC, 60 Hz input into 1 / 4 / 8 / 16 fused or PTC protected outputs. These power supplies feature steel / phenolic / fibreglass construction for mechanical strength and corrosion resistance. They are integrated with a built-in charger for gel or sealed lead acid batteries and provide thermal overload & short circuit protection. They switch automatically over to stand-by battery in case of AC failure and are capable of being operated at temperatures ranging from 32 to 120 degrees F. They are available in enclosure heights of 13.5 & 15.5 inches.

Altronix AL400UX Series power supplies are used for converting a 115VAC, 60Hz input signal into four Class 2 rated 12 or 24VDC power limited outputs. These power supplies provide AC fail supervision to monitor voltage and sound an alarm upon failure. They are integrated with a built-in charger for gel or sealed lead acid batteries and ensure thermal overload & short circuit protection. These UL listed power supplies facilitate automatic switching over to the stand-by battery in case of AC failure and can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix eBridge EoC port receivers are designed for auto detection & protection of legacy non-PoE cameras / devices and transmit data & power over coax cables in PoE compliant formats. They are powered by UL-listed power sources, as well as connected by RJ45 & auto-crossover ethernet connectors for compatibility & additional protection from harsh environments. These receivers are integrated with LED indicators through which controlling & viewing data logging becomes easy. They can operate at temperatures ranging from -20 degrees to 49 degrees Celsius. The throughputs are rated to pass at least 25Mbps up to 500 meter distance and requires Cat5 wire cables for high transmission of speed.

Altronix power supplies / chargers are designed for converting input power signals into PTC protected outputs. They feature steel / phenolic / fibreglass construction for mechanical strength and corrosion resistance. The built-in charger has gel or sealed lead acid batteries and provides thermal overload & short circuit protection. These power supplies / chargers are capable of being operated at temperatures ranging from 0 to 49 degrees C and are available in grey & red finish variants.

Altronix access power integration kits are designed to accommodate various combinations of CDVI Atrium A22K/A22NB/ADH10 boards for up to four doors in a single enclosure. These pre-assembled kits consist of Trove1 enclosures / backplanes with factory-installed Altronix power supplies / chargers and sub-assemblies. These units automatically switch over to a stand-by battery when AC power fails. There is zero voltage drop when the unit switches over to battery backup.

Altronix UTP passive transceiver hubs have integral camera power to transmit UTP video, RS422 / RS485 data and power over a single Cat-5 or higher structured cable. These hubs feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression for protection from voltage spikes. The video transmission range is up to 750 ft per channel. These hubs have a rack mount chassis for rack, wall or shelf mounting.

Altronix eBridge IP over coax receivers transmit data & power over coax cables and facilitate system upgrades from analogue to IP devices or cameras by utilising existing legacy coax. They eliminate the labour & costs during the installation of a new network cable and enable power & data transmission extended over 500 meters. Further, these CE-approved & UL-listed receivers extend network link distances in industrial environments and upgrade deployed CCTV coax to digital networks for airports, hospitals, schools & casinos, working along with megapixel, HD1080 & HD720 cameras. They feature RJ45 type ethernet connectivity for compatibility & additional protection in harsh environments and LED indicators to indicate the proper point-to-point functioning of the devices. Additionally, these C-Tick compliant devices are equipped with type 16 channels, allowing them to have 16 cameras on one system and the throughputs are rated to pass up to 25 Mbps over long distances. Choose from a wide range of these devices with operating temperatures ranging from 14 degrees Fahrenheit to 122 degrees Fahrenheit, available in 1 & 16 output variants.

Linear power supplies / chargers from Altronix are designed to convert a low voltage AC input into a 12VDC or 24VDC output. They provide filtered and electronically regulated output. These units can limit overload and short circuit currents to provide thermal overload and short circuit protection. They come with a built-in charger for sealed lead acid or gel batteries. These units are integrated with LED indicators to show AC input and DC output.

Altronix off-line power supplies / chargers are designed for applications requiring additional power, such as security systems and access controls. These power supplies / chargers feature phenolic / fibreglass construction for mechanical strength & corrosion resistance. They are equipped with a built-in charger for gel or sealed lead acid batteries and provide thermal overload & short circuit protection. These power supplies / chargers offer relative humidity up to 85% (+/- 5%).

Altronix offers power supply units to provide power via 4 protected outputs for CCTV cameras, heaters and video accessories. These CCTV power supplies come with three Class 2 rated power limited outputs that are PTC protected to offer resettable overcurrent protection. These units feature a NEMA 4 rated enclosure for outdoor use. These units are integrated with an illuminated master power function to disconnect the circuit breaker with a simple manual reset.