Electromagnetic Lock Power Supplies

Altronix UTP passive transceiver hubs are used to transfer UTP video, power and data over a single CAT-5 or high structured cable for high speed transmission. They provide 8 camera channels in space saving, wall or rack mount enclosures with video transmissions up to 750 feet per channel. These devices feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression to resist increasing temperatures. The optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from 4 cameras at a time over a single CAT-5 or high structured cable and provide power to minimise the possibility of voltage drops, associated with long cable runs.

Altronix CCTV power supplies provide 12VDC, 24VAC & 28VAC voltages, distributed via sixteen or eighteen fuses or Class 2, PTC protected outputs for powering surveillance cameras, heaters, and other video accessories. The UL- listed power supplies feature steel construction to withstand corrosion, deliver filtered & electronically regulated outputs for smooth, DC supplies and ensure short circuit & thermal overload protections. Additionally, they maintain camera synchronisations and have 3-wire line cords, ensuring integral strain relief. The catalogue also includes CE-approved, CCTV rack, power supplies, thereby providing surge protection and an illuminated, power disconnect circuit breaker with manual reset. Further, these devices are equipped with removable terminal blocks with locking screw flanges & spare fuses. These wall mounted CCTV power supplies offer individual, power LED indicators for indicating triggered DC outputs. Variants are available in 50 Hz & 60 Hz input frequencies.

Altronix triple output power supplies / chargers are used with access control systems & accessories and convert 115VAC / 60 Hz input voltage into three individually PTC protected, 5VDC, 12VDC & 24VDC regulated output voltages. They feature steel construction to withstand corrosion and are compatible with sealed, lead acid or gel type batteries. These UL-listed chargers have battery percentage displays and feature low battery supervisions through form C contacts to trigger reporting or signalling devices. They prevent AC failures due to overvoltage & overcurrent faults and are integrated with LED indicators, indicating triggered DC outputs and operate on temperatures ranging from 0 degree Celsius to 49 degrees Celsius. Variants are available in enclosure depths of 3.25 and 4.50 inches.

Altronix 8-door software access and power integration kits consist of pre-assembled Trove1SH1R enclosure / backplane with factory installed power supplies / chargers & sub-assemblies. These access & power integration kits are capable of accommodating various software house board combinations up to 8 doors, in a single enclosure. These kits are integrated with built-in chargers for sealed lead acid or gel batteries and are capable of being operated at temperatures ranging from 0 to 49 degrees C.

Altronix backplanes are ideal for trove enclosures that accommodate & easily integrate power supplies / chargers with mercury power boards, access controllers & sub-assemblies. They feature galvanised steel construction for ease of inspection, tough coating & corrosion resistance and include mounting hardware for easy installation. Further, these backplanes simplify wire management & board layouts, as well as minimise labour costs & installation time.

Altronix dual P/S access power controllers are used for distributing and switching power to access control systems and related accessories. They convert a 120VAC, 60Hz input into 16 independently controlled 12VDC & 24VDC fuse protected outputs. These Fail-Secure / Fail-Safe power outputs are activated by a normally open (NO) dry trigger or an open collector sink input. These access power controllers come integrated with built-in chargers for sealed lead acid or gel batteries and are capable of being operated at temperatures ranging from 0 to 49 degrees C.

Altronix access power controllers convert one, 12V to 24V voltage input into four independently controlled, fuse protected & auto-resettable outputs. They are powered by one common power source, providing power for both the board operations & locking devices and the outputs operate in both Fail-Safe & Fail-Secure modes for an adjustable voltage output. These UL-listed devices come with red & green visual indicator LEDs indicating triggered outputs & FACP (fire alarm control panel) disconnections, respectively and are integrated with individually selectable fire alarm disconnect interfaces (latching or non-latching), for all the four outputs that enable emergency egress, alarm monitoring & to trigger other auxiliary devices. Choose from a broad range of these controllers, available in phenolic, fibreglass and steel constructions to withstand rigorous environments.

Altronix power supply chargers are used for powering, installing and repairing electromagnetic door locks. The built-in charger houses gel or sealed lead acid batteries and delivers relative humidity up to 85% (+/- 5%). These supplies or chargers can be operated at temperatures ranging from 32 to 120 degrees F and are coated with grey finish for resisting corrosion on exposed surfaces.

Altronix AL125UL Series access control power supply chargers are used to convert 115VAC, 50 / 60Hz input into 2 individually PTC protected 12VDC & 24VDC outputs. They are suitable for applications that require an interface with fire alarm control panels. The built-in charger houses gel or sealed lead acid batteries and facilitates automatic switching over to the stand-by battery in case of AC failure. These power supply chargers can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix multi-output power supply chargers convert 115V AC, 60 Hz input into four, 12VDC or 24VDC, Class 2, power outputs. They feature filtered & electronically regulated outputs for a smooth DC power supply and provide protection from short circuits & thermal overloads. These devices offer automatic switch overs to stand-by batteries during AC failures and have built-in chargers for sealed, lead acids or gel type batteries. The visual relay indicators prevent overvoltage & overcurrent faults. They provide low battery supervisions through form C contacts to trigger reporting or signaling devices. Choose from a broad range of these chargers having operating temperatures ranging from 0 degree to 49 degrees Celsius.

Altronix power supply chargers / boards convert 115VAC, 60 Hz input into single 12VDC non power-limited voltage outputs. They feature phenolic or fibreglass construction, ensuring excellent electrical insulation and filtered & electronically regulated outputs for a smooth DC power supply. These boards protect from short circuits & thermal overloads and have built-in chargers for sealed, lead acids or gel type batteries. They offer automatic switch overs to stand-by batteries during AC failures and zero voltage drops when switched over to battery backup. Choose from a wide range of these power supply boards with operating temperatures ranging from 0 degree to 49 degrees Celsius and are available in 12VDC & 24VDC voltage outputs.

Altronix EoC hardened transceivers are designed to transmit data over Coax cables and provide power in a PoE / PoE+ compliant format to an enabled device / camera. These units feature a plug and play feature to facilitate hassle-free installation. Selected models can support up to two PoE or PoE+ cameras / devices or a single Hi-PoE (60W) device. They also feature built-in IP management for remote camera reset, monitoring and reporting via various IP protocols.

Altronix SFP transceivers are used for connecting a copper or fibre-optic cable for data communication & telecommunication applications. These SFP devices feature embedded LINQ technology that allows monitoring, controlling & reporting power, and a built-in charger for sealed gel or lead acid batteries. These SFP transceivers provide relative humidity up to 85% (+/- 5%) and are capable of being operated at temperatures ranging from - 40 to 167 degrees F.

Altronix midspan power injectors are used for connecting a network camera, IP phones and a wireless access point to a network switch. These injectors help the existing network to support PoE and offer auto detection & protection of legacy non-PoE cameras or edge devices. Selected models feature LINQ technology for remote & local access to critical information via LAN or WAN with secure socket layer (SSL) security encryption.

Altronix NetWay midspans provide power and pass data for PoE and PoE+ compliant cameras / edge devices. These network managed midspans feature a battery charger for applications requiring backup. They are integrated with embedded LINQ technology to monitor, control and report power & diagnostics. This technology also provides local and / or remote access to critical information via LAN / WAN. These units feature yellow & green LED visual indicators to convey IP link and port status.

Altronix access power controllers have 8 independently controlled fused outputs to distribute and switch power to access control systems & accessories. These controllers feature an FACP interface that enables emergency egress, alarm monitoring and triggering auxiliary devices. They are integrated with a fire alarm disconnect feature that is individually selectable for any or all of the 8 relay outputs.

Altronix passive UTP transceiver hubs feature integral camera power to transmit UTP video, RS422 / RS485 data and power over a single CAT-5 or higher structured cable. These hubs feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression to protect from voltage spikes. The video transmission range is up to 750 ft per channel. They are compatible with AC and / or DC fixed or PTZ cameras when utilising Altronix HubWayAv, HubWayAv2, HubWayDv or HubWayDvi video baluns / combiners.